CAPS & CLOSURE

 

PHARMA CAP
	Parameters	Specification
		20ml Caps	50/100ml Caps	200ml Caps	400/500ml Caps	1000ml Caps
	1. Cap Weight	1.00gms	2.65gms	5.50gms	5.97gms	10.29 gm
	2. Material used confirmed	HDPE	HDPE	HDPE	HDPE	HDPE
	3. Cap ID with Thread	22.10mm	35.65 mm	47.8mm	54.39mm	65.15 mm
	4. Cap ID without Thread	21.50mm	33.40 mm	46.10mm	56.67mm	67.49 mm

 

PHARMA CAP
	Parameters	Specification
	1. Cap Weight	2.4g ± 0.3g
	2. Cap Height	12.6 ± 0.5mm
	3. Cap Internal Diameter	31.9 ± 0.5mm
	4. Cap Outer Diameter	35 ± 0.5mm

 

AEROSOL CAP
	Parameters	Specification
	1. Cap Weight	8.10 ( +/- 0.05 gms)
	2. Stem Height	24.95 mm ( +/- 0.20 mm)
	3. Pin Hole	1.00 mm (+/- 0.01 mm )
	4. Stem Seating ID	4 mm ( +/- 0.05 mm )
	5. Cap Outer Diameter	52.46 mm ( +/- 0.20 mm )
	6. Cap Internal Diameter	51.30 mm ( +/- 0.20 mm)
	7. Cap Height	47.80 mm (+/-0.20 mm)

 

INSECTICIDE AEROSOL CAP
	Parameters	Specification
	1. Cap Weight	8.12 gms +/- 0.20 gms
	2. Stem Height	12.85 mm(+/- 0.10mm )
	3. Nozzle ID	1.00 mm ( +/- 0.01mm )
	4.Stem ID	3.85 mm ( +/- 0.05mm )

 

INSECTICIDE AEROSOL CAP
	Parameters	Specification
	1. Cap Weight	11.50 gms ( +/- 0.20 gms)
	2. Stem Height	15.54 mm ( +/- 0.10 mm)
	3. Nozzle ID	1.00 mm (+/- 0.01 mm )
	4.Stem ID	3.85 mm ( +/- 0.05 mm )

 

NOZZLE & ADHESIVES 2gm
	Parameters	Specification
		2 GMS Caps & Nozzle
	1. Cap Weight	2.10 gms
	2. Material	HDPE
	3. Colour	Natural

 

SINO ADHESIVES 20gm
	Parameters	Specification
		20 GMS Caps & Nozzle
	1. Cap Weight	5.70 gms
	2. Material	Marlex
	3. Colour	Natural

 

AEROSOL CAP
	Parameters	Specification
	1. Cap Weight	14.5 gms
	2. Material	PPCP
	3. Colour	Pink/Blue/green